Wiwax Cleaning & Maintenance Emulsion is a unique blend of waxes, polymers and detergents to effectively clean and maintain rubber as well as linoleum, asphalt, marble, stone, concrete and slate flooring. It delivers a clean floor with a shiny appearance. This integral part of a comprehensive floor care program for cleaning, stripping and sealing rubber floors provides protection when used on a regular basis. Varied ratios include 1:1, 1:10, 1:32, 1:64 and 1:128. Arched handle on bottle allows easy pouring.

• 1. Dust mop or sweep.
• 2. Blockade areas to be cleaned. Floors will be very slippery until dry.
• 3. Add four (4) oz. per gallon (30mL per liter) of this product to lukewarm water. Scrub floor with product. Trail mop excessive wet areas behind scrubber. Do not rinse floor after cleaning.
• 4. Let floor dry completely

• 1. Dust mop or sweep.
• 2. Blockade areas to be cleaned. Floors will be very slippery until dry.
• 3. Add two (2) oz. per gallon (15 mL per liter) of this product to lukewarm water. Mop floor clean with this product. Pick up soil and excess cleaner with a tightly wrung-out cleaning mop. Do not rinse floor after cleaning.
• 4. Let floor dry completely.

• 1. Dust mop or sweep floor.
• 2. Blockade areas to be cleaned. Floors will be very slippery until dry.
• 3. Add (1) oz. per gallon of this product to warm water. Scrub floor with product and Twister™ Intellipad®. Trail mop excessive wet areas behind scrubber. Do not rinse floor after cleaning.
• 4. Let floor dry completely.

• 1. Dust mop or sweep floor.
• 2. Blockade areas to be cleaned. Floors will be very slippery until dry.
• 3. Clean floor with a neutral floor cleaner according to label directions.
• 4.Add thirteen (13) oz. per gallon (101 mL per liter) of this product to lukewarm water. Pick up soil and excess cleaner with a tightly wrung-out cleaning mop. Do not rinse floor after cleaning.
• 5. Let air dry.
• 6. For optimal gloss, burnish the floor with Twister™ Intellipad®.

• 1. Dust mop or sweep floor.
• 2. Blockade areas to be cleaned. Floors will be very slippery until dry.
• 3. Clean floor with a neutral floor cleaner according to label directions.
• 4. Dilute this product with lukewarm water at a 1:1 dilution ratio. Apply up to 2 coats using a string mop or flat mop until desired shine is achieved. Be sure to evenly cover the entire floor. Do not rinse floor after cleaning.
• 5. Let air dry.
• 6. For optimal gloss, burnish the floor with Twister™ Intellipad®.

• Do not use on surfaces colder than 50°F/10°C
• To avoid contamination, do not return unused product to original container.