< >

    StarTech.com 2 Port PCI Express SATA 6 Gbps eSATA Controller Card - Dual Port PCIe SATA III Card - 2 Int/2 Ext

    Add 2 external or internal SATA 6 Gbps ports to a computer, through a PCI Express slot - pci express sata 6 - pcie sata 6 - pci express sata iii card - pci express esata - pcie esata

    Product Code: STCPEXESAT322I
    (Out of Stock)
    Non-Returnable Product
    • IMPROVE STORAGE CAPACITY: This 2-Port PCIe SATA and eSATA Controller Card enables support of two internal SATA or external (eSATA) drives through PCI Express; A cost-effective solution to increase your system's storage capacity
    • ASM1061 CONTROLLER: This SATA and eSATA controller card features a dedicated chipset to enable two switchable SATA and eSATA 6Gbps ports via a single x1 PCIe slot; Supports FIS-based Port Multiplier, Command-based switching, NCQ, and ATA/ ATAPI commands
    • WIDE COMPATIBILITY: Supports Windows and standard SATA and eSATA SSDs (solid-state drives) and HDDs (hard drives); Supports SATA III (6 Gbps) and earlier revisions; Compliant with PCI Express 2.0
    • CONVENIENT SETUP: This 2-port SATA/eSATA controller card installs in a full or low-profile PCIe slot; Compatible with PCIe x1, x4, x8, or x16 slots; Includes full-profile (pre-installed) & low-profile brackets, and 7-pin SATA cable
    • THE IT PRO'S CHOICE: Designed and built for IT professionals, this 2-Port SATA and eSATA Controller Card is backed for 2 years, including free lifetime 24/5 multi-lingual technical assistance

Product Details

General Information

Manufacturer StarTech.com
Manufacturer Part Number PEXESAT322I
Manufacturer Website Address http://www.startech.com
Brand Name StarTech.com
Product Name PCIe SATA Controller
Marketing Information

The PEXESAT322I PCI Express SATA III Controller Card (6 Gbps) gives you the option to add 2 internal or external SATA ports to your computer, through a single PCI Express (x1) card slot. The card features on board jumper selection, which enables you to configure the card to provide 2 internal or external SATA III ports, or one of each, as needed.

The SATA III card features Port Multiplier (PM) support on each port, which allows multiple drives to be connected over a single cable when necessary to maximize the number of SATA device connections while reducing the amount of cabling required.

The card is fully compliant with the SATA revision 3.0 specification (up to 6Gbps of data bandwidth), enabling you to utilize the speeds of high performance hard drives and Solid State Drives (SSD), as well as SATA-based optical drives (CD-ROM, DVD-ROM, Blu-Ray).

The PEXESAT322I SATA III Controller card is backed by our 2-year manufacturer warranty and free lifetime technical support.

More from the Manufacturer
Packaged Quantity 1
Product Type SATA Controller

Technical Information

Host Interface PCI Express x1
Controller Type Serial ATA/600

Interfaces/Ports

Total Number of SATA Ports 4
Number of SATA Ports (Internal) 2
Number of SATA Ports (External) 2

Physical Characteristics

Height 0.8"
Width 3.6"
Length 4.8"
Form Factor Plug-in Card
Weight (Approximate) 1.70 oz

Miscellaneous

Package Contents
  • PCIe SATA Controller
  • SATA Cable
  • Low Profile Bracket
  • Driver CD
  • Instruction Manual
Platform Supported PC
Environmentally Friendly Yes
Environmental Certification
  • REACH
  • WEEE
  • RoHS
Environmental Compliance
  • Registration, Evaluation, Authorization and Restriction of Chemicals (REACH)
  • Restriction of Hazardous Substances (RoHS)
  • Waste Electrical and Electronic Equipment Directive (WEEE)
Country of Origin China

Warranty

Limited Warranty 2 Year

Overview

Alternative Products

We are sorry but no alternatives are currently available.

Additional Documentation

Additional-pdf1
Additional-pdf2

Reviews